Tag Archives: pto shaft series

W 2200 series PTO Shaft Replacement of Walterscheid

Connection outside diameter tractor side 1-3/8 Inch
Connection number of splines/grooves by tractor side 6
Consists of
  • Pto shaft with shield and slip clutch K32B (60 daNm)
  • Declaration of conformity
  • Instruction manual
Locking type by tractor side Collar lock
Attachment tractor side Quick disconnect yoke
Connection Ø machine side 1-3/8 Inch
Connection number of splines/grooves by machine side 6
Locking type by machine side Collar lock
Attachment machine side Radial pin clutch
Size code W2200
Length 710 mm
Power per 540 rpm 20 kW
Power per 1000 rpm 31 kW
Cross joint cap diameter tractor side 24 mm
Cross joint length tractor side 61 mm
Cross joint cap diameter machine side 24 mm
Cross joint length machine side 61 mm
Clutch type K32B
Max clutch torque 600 N·m
Outer tube profile  1
Outer tube wall thickness 3 mm
Outer tube large outside diameter 48 mm
Inner tube profile Ov
Inner tube wall thickness 4 mm
Inner tube large outside diameter 40 mm
Profile tube shape Lemon
Max static torque 1850 N·m

W 2200 series PTO Shaft Replacement of Walterscheid

  • Lubrication frequency from 50 to 100 hours
  • Fulfilling the requirements laid out in EC 89/392 EEC
  • Compliant with EN12965 safety standard
  • CE marking available
  • Max. dynamic capacity 540 rpm: 20 kW, 335 Nm
  • Max. dynamic capacity 1,000 rpm: 31 kW, 295 Nm
  • Values at working angle 5° and service life 1000 hours

Specifications Of W 2200 Series PTO shaft

Tractor PTO Shaft Assemblies and Replacement Parts

Tractor PTO shaft: If you are looking for a complete assembly, we have you covered. We offer a large selection of North American-designed and Italian-designed PTO driveshafts in the length and spline configuration you need.
CV PTO Assembly: The CV (Constant Velocity) PTO shaft can be used with most tractors and implements. These products balance the power input and shaft output of the tractor to provide greater stability when engaged.
Cross and Bearing Kit: The Cross and Bearing Kit is the universal joint that forms the heart of the PTO driveshaft system. This part is the point of power distribution from the PTO components to the connected equipment.
Half-Shaft Assemblies: We have a wide variety of 48″ and 60″ Weasler Axle PTO Assemblies. Center and shaft end length assemblies are available in square and rectangular design options.
Additional Components: If your PTO shaft parts start to show signs of wear, save money on new components by replacing individual components. We have a huge range of new guards and guard bearings, inner and outer tubes, yokes, pins, and universal clutches.

How does the PTO Shaft work?

Much agricultural equipment lacks independent power, which is where the tractor PTO comes in.

Each end of the PTO shaft has connections to the tractor and machine. The tractor PTO shaft is operated with a simple switch and can rotate between 540 and 1,000 RPM, depending on the equipment. When engaged, the shaft draws power and torque from the tractor transmission to give your implement just the right amount of power to get you to work.

PTO shafts come in different sizes, and you’ll need to find 1 that matches the coupling on the equipment you’re towing. Attaching your tool to the tractor should be easy. If you have to lift the device off the ground to attach the shaft or the shaft is too long, forcing the connection can damage both. If you have an existing PTO shaft handy, it’s easy to confirm your length. Close it and measure from PTO yoke to yoke.

PTO Shaft and Agricultural Gearbox

Agricultural gearbox and PTO shaft: These components work together to transfer mechanical power between farm tractors. A PTO shaft converts engine energy into hydraulic pressure. This is what allows the tractor to pull heavy loads. When properly functioning, it reduces the risk of damage to the tractor and to the operator. When used properly, it is an important component of a tractor, but it can also become defective. When choosing an agricultural gearbox, consider the durability and mechanism of the product, as well as its materials. A durable gearbox will last for many years, avoiding repeated replacements. A high-quality agricultural gearbox will be durable for many years to come, and you don’t want to end up replacing it for a while. This can be costly, so consider your needs when purchasing an agricultural gearbox and PTO shaft. HZPT offers PTO shafts and agricultural gearboxes wholesale at low prices! Contact us now if you are interested!

Why choose us?

We have over 14 years of spare parts experience, especially in drivetrain parts. We are deeply involved in the auto parts business in HangZhou, the largest producer of imported parts in China. We provide products with good cost performance to different customers all over the world. We maintain a good relationship with local products through a CZPT policy. The factory supplies high-quality and fast products; We provide high-quality and fast service; Customers get good products and good service for their customers.

It’s a healthy and powerful equilateral triangle that keeps the HangZhou Circuit going.

We are 1 of the leading manufacturers and wholesalers of PTO spare parts for light and heavy vehicles. Manufactured using advanced technology using high-quality raw materials, we offer products in a variety of sizes, shapes, designs, and capacities. Our products are known for their ease of maintenance, and we deliver them in a cost-effective and durable manner. Therefore, these products are available based on the given information of the customer.

What Are Screw Shaft Threads?

A screw shaft is a threaded part used to fasten other components. The threads on a screw shaft are often described by their Coefficient of Friction, which describes how much friction is present between the mating surfaces. This article discusses these characteristics as well as the Material and Helix angle. You’ll have a better understanding of your screw shaft’s threads after reading this article. Here are some examples. Once you understand these details, you’ll be able to select the best screw nut for your needs.

Coefficient of friction between the mating surfaces of a nut and a screw shaft

There are 2 types of friction coefficients. Dynamic friction and static friction. The latter refers to the amount of friction a nut has to resist an opposing motion. In addition to the material strength, a higher coefficient of friction can cause stick-slip. This can lead to intermittent running behavior and loud squeaking. Stick-slip may lead to a malfunctioning plain bearing. Rough shafts can be used to improve this condition.
The 2 types of friction coefficients are related to the applied force. When applying force, the applied force must equal the nut’s pitch diameter. When the screw shaft is tightened, the force may be removed. In the case of a loosening clamp, the applied force is smaller than the bolt’s pitch diameter. Therefore, the higher the property class of the bolt, the lower the coefficient of friction.
In most cases, the screwface coefficient of friction is lower than the nut face. This is because of zinc plating on the joint surface. Moreover, power screws are commonly used in the aerospace industry. Whether or not they are power screws, they are typically made of carbon steel, alloy steel, or stainless steel. They are often used in conjunction with bronze or plastic nuts, which are preferred in higher-duty applications. These screws often require no holding brakes and are extremely easy to use in many applications.
The coefficient of friction between the mating surfaces of t-screws is highly dependent on the material of the screw and the nut. For example, screws with internal lubricated plastic nuts use bearing-grade bronze nuts. These nuts are usually used on carbon steel screws, but can be used with stainless steel screws. In addition to this, they are easy to clean.

Helix angle

In most applications, the helix angle of a screw shaft is an important factor for torque calculation. There are 2 types of helix angle: right and left hand. The right hand screw is usually smaller than the left hand 1. The left hand screw is larger than the right hand screw. However, there are some exceptions to the rule. A left hand screw may have a greater helix angle than a right hand screw.
A screw’s helix angle is the angle formed by the helix and the axial line. Although the helix angle is not usually changed, it can have a significant effect on the processing of the screw and the amount of material conveyed. These changes are more common in 2 stage and special mixing screws, and metering screws. These measurements are crucial for determining the helix angle. In most cases, the lead angle is the correct angle when the screw shaft has the right helix angle.
High helix screws have large leads, sometimes up to 6 times the screw diameter. These screws reduce the screw diameter, mass, and inertia, allowing for higher speed and precision. High helix screws are also low-rotation, so they minimize vibrations and audible noises. But the right helix angle is important in any application. You must carefully choose the right type of screw for the job at hand.
If you choose a screw gear that has a helix angle other than parallel, you should select a thrust bearing with a correspondingly large center distance. In the case of a screw gear, a 45-degree helix angle is most common. A helix angle greater than 0 degrees is also acceptable. Mixing up helix angles is beneficial because it allows for a variety of center distances and unique applications.

Thread angle

The thread angle of a screw shaft is measured from the base of the head of the screw to the top of the screw’s thread. In America, the standard screw thread angle is 60 degrees. The standard thread angle was not widely adopted until the early twentieth century. A committee was established by the Franklin Institute in 1864 to study screw threads. The committee recommended the Sellers thread, which was modified into the United States Standard Thread. The standardized thread was adopted by the United States Navy in 1868 and was recommended for construction by the Master Car Builders’ Association in 1871.
Generally speaking, the major diameter of a screw’s threads is the outside diameter. The major diameter of a nut is not directly measured, but can be determined with go/no-go gauges. It is necessary to understand the major and minor diameters in relation to each other in order to determine a screw’s thread angle. Once this is known, the next step is to determine how much of a pitch is necessary to ensure a screw’s proper function.
Helix angle and thread angle are 2 different types of angles that affect screw efficiency. For a lead screw, the helix angle is the angle between the helix of the thread and the line perpendicular to the axis of rotation. A lead screw has a greater helix angle than a helical 1, but has higher frictional losses. A high-quality lead screw requires a higher torque to rotate. Thread angle and lead angle are complementary angles, but each screw has its own specific advantages.
Screw pitch and TPI have little to do with tolerances, craftsmanship, quality, or cost, but rather the size of a screw’s thread relative to its diameter. Compared to a standard screw, the fine and coarse threads are easier to tighten. The coarser thread is deeper, which results in lower torques. If a screw fails because of torsional shear, it is likely to be a result of a small minor diameter.


Screws have a variety of different sizes, shapes, and materials. They are typically machined on CNC machines and lathes. Each type is used for different purposes. The size and material of a screw shaft are influenced by how it will be used. The following sections give an overview of the main types of screw shafts. Each 1 is designed to perform a specific function. If you have questions about a specific type, contact your local machine shop.
Lead screws are cheaper than ball screws and are used in light-duty, intermittent applications. Lead screws, however, have poor efficiency and are not recommended for continuous power transmission. But, they are effective in vertical applications and are more compact. Lead screws are typically used as a kinematic pair with a ball screw. Some types of lead screws also have self-locking properties. Because they have a low coefficient of friction, they have a compact design and very few parts.
Screws are made of a variety of metals and alloys. Steel is an economical and durable material, but there are also alloy steel and stainless steel types. Bronze nuts are the most common and are often used in higher-duty applications. Plastic nuts provide low-friction, which helps reduce the drive torques. Stainless steel screws are also used in high-performance applications, and may be made of titanium. The materials used to create screw shafts vary, but they all have their specific functions.
Screws are used in a wide range of applications, from industrial and consumer products to transportation equipment. They are used in many different industries, and the materials they’re made of can determine their life. The life of a screw depends on the load that it bears, the design of its internal structure, lubrication, and machining processes. When choosing screw assemblies, look for a screw made from the highest quality steels possible. Usually, the materials are very clean, so they’re a great choice for a screw. However, the presence of imperfections may cause a normal fatigue failure.

Self-locking features

Screws are known to be self-locking by nature. The mechanism for this feature is based on several factors, such as the pitch angle of the threads, material pairing, lubrication, and heating. This feature is only possible if the shaft is subjected to conditions that are not likely to cause the threads to loosen on their own. The self-locking ability of a screw depends on several factors, including the pitch angle of the thread flank and the coefficient of sliding friction between the 2 materials.
One of the most common uses of screws is in a screw top container lid, corkscrew, threaded pipe joint, vise, C-clamp, and screw jack. Other applications of screw shafts include transferring power, but these are often intermittent and low-power operations. Screws are also used to move material in Archimedes’ screw, auger earth drill, screw conveyor, and micrometer.
A common self-locking feature for a screw is the presence of a lead screw. A screw with a low PV value is safe to operate, but a screw with high PV will need a lower rotation speed. Another example is a self-locking screw that does not require lubrication. The PV value is also dependent on the material of the screw’s construction, as well as its lubrication conditions. Finally, a screw’s end fixity – the way the screw is supported – affects the performance and efficiency of a screw.
Lead screws are less expensive and easier to manufacture. They are a good choice for light-weight and intermittent applications. These screws also have self-locking capabilities. They can be self-tightened and require less torque for driving than other types. The advantage of lead screws is their small size and minimal number of parts. They are highly efficient in vertical and intermittent applications. They are not as accurate as lead screws and often have backlash, which is caused by insufficient threads.

Best sales made in China – replacement parts – PTO shaft manufacturer & factory New drive shaft bmw 3 series Ce Safety Stops 7 Inches Hydraulic Wood Chipper with ce certificate top quality low price

We – EPG Team the biggest agricultural gearbox and pto manufacturing unit in China with 5 different branches. For far more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

Best  sales  made in China - replacement parts - PTO shaft manufacturer & factory New  drive shaft bmw 3 sequence Ce Safety Stops 7 Inches Hydraulic Wood Chipper with ce certificate top good quality minimal price

pto shaft stuck on apply Our pto clutch plate manufacturing facility pto driveline areas has pto yoke press pin obtained 2015 f150 driveshaft the denny driveshaft certificate duramax driveshaft of 1350 driveshaft China’s how to get rid of pto shaft locking pin Farm fleet farm pto shaft Equipment Goods Good quality Authentication promulgated by the Farm Equipment Goods Top quality Authentication Centre of China. It is our aim to supply a huge selection of top quality products at reasonably priced prices, offer the very best service for buyers pleased and add to our ongoing improvement. BX52R Hydraulic Wooden Chipper has a tractor PTO run rotor and hydraulic feed hopper, indicating logs, branches, limbs and brushes are control fed for constant chipping at optimum ability. 
A self-contained powered hydraulic technique offers EPT functioning to the chipper shredder, reducing the very hot dilemma of the hydraulic oil from doing work tractors. Hydraulic valves and hoses are safeguarded. The hydraulic elements can perform with sturdy longer lifestyle. So the equipment will be in use for a for a longer time daily life-time employing and much less servicing.

Advantages contain:
1. 5 inches chipping capability
two. Previously mentioned 25HP tractor PTO powered and towed
3. With self-contained hydraulic oil tank and pump program,
4. Strong and rock construction constructed with 400kg net fat
five. 4 double edges sharp slicing knives and 1 bed blade
six.  Latest CE rigorous safety stHangZhourds 
7. Much more higher efficient and considerably less routine maintenance by making use of branded parts and add-ons
8. Employing welcoming with humanization design
9. Hopper folded for greater and safer transportation
10. Double fingers operating tends to make sure the greater safety and high quality stHangZhourd

Complex Specifications:


Best  sales  made in China - replacement parts - PTO shaft manufacturer & factory New  drive shaft bmw 3 series Ce Security Stops 7 Inches Hydraulic Wood Chipper with ce certificate best good quality low price

Isuzu Cost made in China – replacement parts – pto shaft series 4 1-3/8 6-spline 190HP 6m3 6000L 6cbm Vacuum Sewage Suction Truck on Sales with ce certificate top quality low price

We – EPG Group the largest agricultural gearbox and pto manufacturing facility in China with 5 diverse branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Isuzu  Cost  made in China - replacement parts -   pto shaft series 4 1-3/8 6-spline 190HP 6m3 6000L 6cbm Vacuum Sewage Suction Truck on Revenue with ce certificate best high quality low price

pto shafts for tractors Our pto yoke drive pin company e30 driveshaft has howse bush hog generate shaft strong front drive shaft jeep grand cherokee economic pto coupler varieties strength, tractor pto shaft slip clutch builds tractor pto shaft elements for sale up 2013 mustang gt driveshaft a 04 f150 driveshaft technician crew contingent with higher high quality, possesses the generation assembly line of technicalization in China and best method checking on product good quality and runs advertising and marketing networks all through the region. EPG brand name rotocultivator ploughshares in T. line had been chosen as the Nationwide Rotary Tillage Machinery Industry “Best Model Products” in 2007 by Rotocultivator Department of China Agricultural Machinery Market Affiliation.  

» I.What is vacuum sewage suction truck ?


one)Vacuum sewage suction truck (also known as truck mounted sewage cleaner,vacuum cleaner truck ,vacuum suction truck ,vacuum suction tanker ,vacuum squander assortment truck ,sewage suction truck,sewage vacuum truck ,squander vacuum truck ,sewer truck ,cesspit emptier ,gully emptier,and so forth.) is used to acquire, transport and discharge liquid such as soiled h2o,sludge,septic,crude oil and reliable stuff this kind of as small stones,bricks as properly.It is suitable for cleansing the sewer,cesspit,gully ,and so on. It is commonly utilized in surroundings and sanitation discipline.

2)Accessory of sewage suction function :Outfitted with PTO, transmission shaft, vacuum suction sewage pump, large pressure molding tank, humidity separator, gasoline-oil separation, multiple directional handle valve, hanger rod, self-discharging valve, suck fecal gun and pipe network program.

3)vacuum tank potential ranges from 3,000 Liters to 20,000 liters 


a.Cylinder vacuum tank can be lifted hydraulically to forty-45 diploma.Rear doorway can be opened and shut hydraulically.


b.Undertake EU vacuum pump (Italy model) or equal China best manufacturer double vacuum pumps,tremendous effective,highly successful.


c.Pump can be operated by a hydraulic motor or by an auxiliary engine.


d.Overfill technique with tunes horn is outfitted ,preventing the vacuum pump harm from sewage h2o into vacuum pump when the tank is full.


e.Wonderful condition ,rational construction,tough and prolonged services lifestyle.

» II. SPECIFICATION OF ISUZU 190HP 6m3/6000L/6CBM Vacuum Sewage Suction Truck on Product sales

ISUZU 190HP 6m3/6000L/6CBM Vacuum Sewage Suction Truck on Sales
General Automobile Brand VELDLION 
Chassis Brand ISUZU
Overall Dimension 6700*2300*2700mm
GWW/Kerb Bodyweight ten,000kg/15,480kg
Cab Taxi Ability two persons allowed
Air Conditioner Outfitted
Engine Gasoline Type Diesel
Motor Manufacturer ISUZU motor
Electrical power 190Ps(139KW)
Displacement 5193ml
Emission StHangZhourd EuroV
Chassis Travel Variety 4X2,left hand push
Transmission ISUZU gearbox ,no overhaul in five hundred,000km
No.of axle 2
Tyre Specification 235/75R17.5
Tyre Number 6 tyres and 1 spare tyre
Max Speed 105km/h
Paint Metallic paint
Super structure Tank Potential 6,000Litres(about1,500gallons)
Tank Substance Carbon steel
Suction Head 7m
Vacuum Pump Highly effective,vacuum rate93%,
quick suction and discharge,suction lift 6m.
Hose Higher high quality,wires trengthened hose
Rear doorway can be hydraulic opened for full discharge of solid things.
All stHangZhourd accessories:inlet,discharge,antifillval
Optional **Tank content could be carbon steel,stainles metal**
**Vacuum pump could be imported manufacturer**

» III. DETAI EPT PHOTOS  OF ISUZU 190HP 6m3/6000L/6CBM Vacuum Sewage Suction Truck on Sales 

» IV. DRAWING OF Regular Product

» V. Continue Manufacturing OF SEWAGE VACUUM TRUCK 




» VIII. Thanks FOR YOUR Look at,WELCOME TO Speak to US FOR Far more Information


Isuzu  Cost  made in China - replacement parts -   pto shaft series 4 1-3/8 6-spline 190HP 6m3 6000L 6cbm Vacuum Sewage Suction Truck on Product sales with ce certificate prime good quality reduced price tag

Tractor China pto drive shaft series Mounted 3 Point Machines Pto Driven One Row Sweet Potato Harvester with ce certificate top quality low price

We – EPG Team the largest agricultural gearbox and pto manufacturing facility in China with five various branches. For much more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

Tractor  China   pto drive shaft series Mounted 3 Point Machines Pto Driven One Row Sweet Potato Harvester with ce certificate top quality low price

2003 jeep grand cherokee entrance push shaft EPG pto shaft brush hog manufacturer getting rid of pto shaft from tractor rotocultivator tractor pto shear pin ploughshares 2003 chevy silverado rear push shaft in peterbilt drive shaft T. pto shaft for john deere line howse brush hog pto shaft ended up 2004 chevy avalanche drive shaft picked ford 8n pto shaft dimension as the Nationwide Rotary Tillage Equipment Sector “Perfect Brand name Products” in 2007 by Rotocultivator Department of China Agricultural Equipment Industry Association. “EPG” manufacturer rotocultivator ploughshares in T.S. complete traces produced in our manufacturing facility have been tested and appraised by the Ministry of Agriculture and have acquired the license of popularizing farm equipment promulgated by the Ministry of Agriculture of the People’s Republic of China. Tractor mounted three level machines PTO driven one particular row sweet potato harvester
one.This sequence potato harvester not only utilized for potato and also for sweet potato, garlic, onion and other root crops.
2.4U Series Potato Harvester has the merits of high efficiency, lower breakage, running fast without trembling, 
and no blocking by the grasses
3.With ISO certificate and international technology. 
four.two a long time ensure.

4U collection potato harvester is three pointed mounted with the tractor, dirve by rear pto shaft. This tractor potato harvester is intended for potato excavation , tubers partial separation from the soil and tubers laying on discipline floor for their further picking up. A triangular beater is established on the potato harvester.
The working theory of this potato harvester is that the digging shovel digs up the soil and crops by way of the impetus of the tractor. And the digging shovel make crop and soil individual although vibration sieve, the soil very first drip down from the clearance of vibration sieve, lastly the crop crashed down on to the highway from the back again.

Equipment element:
1.This potato harvester machine for 25-80hp 4 wheel tractor.
2.Dig the potatoes securely without chopping single potato or damaging potato skin.
3.Not to have an effect on the subsequent crop’s growth.
4.Driven by PTO in rotating speed 540 r/min.

Main Specifications:

Type 4UD-1 4U-1 4U-two
Overall proportions (L×W×H) (cm) 240×90×100 240×100×100 280×220×100
Bodyweight(kg) a hundred and eighty 220 600
Rows one 1 2
Area of rows 55-eighty
Productivity(ha/h) .two-.33 .two-1.33 .33-.54
Operating depth (cm) 20-35
Functioning width (mm) 600 850 1650
Netrate of harvesting 97%
PTO pace (RPM) 540/760
Linkage  three-stage mounted
Matched Tractor Power(hp) 12-35 15-35 fifty-eighty

1.Following-product sales: usually, this kind of machine sel EPT takes place issues. But, if there is any defeacts, just speak to with us, we will consider our ideal to remedy your troubles and give a hand for resolving your difficulties.
two. Totally free components: free spare elements is accessible for our clients. If you have other EPT requirements for the components of equipment, we can supply you that.
three. Terms of payment: TT, Western Union, L/C or other approaches of payment.
4. Supply: five-8days soon after obtaining payment.
five. Warrantee itme: 24 months.
6. Transport: by sea, by street or other ways which buyer desire.
Welcome to make contact with us!

Tractor  China   pto drive shaft series Mounted 3 Point Machines Pto Driven One Row Sweet Potato Harvester with ce certificate top quality low price

High-Efficiency China weasler 55 series pto shaft Motor-Powered Corn Thresher Maize Peeling and Threshing Machine with ce certificate top quality low price

High-Efficiency  China  weasler 55 series pto shaft Motor-Powered Corn Thresher Maize Peeling and Threshing Machine with ce certificate top quality low price

We – EPG Team the biggest agricultural gearbox and pto manufacturing facility in China with five different branches. For more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

We developed, specifically for our customers, a protective cone which is flexible and permits easier handling even though coupling the PTO on the tractor or working device. The adaptable cone gives added ease and comfort when coupling the PTO, simply because you can get a good grip in the constrained shaft area. PTO Adapters To steer clear of prospective connectivity troubles, you could want to take into account a PTO Adapter for your tractor. The PTO adapter extends the link to the put into action, providing additional area for the PTO shaft to change with out touching the Arm Weldment or other elements of your tractor or the apply.bare co pto shield Underneath subaru propeller shaft the push shaft for 2000 chevy silverado z71 advice ford tractor pto shaft of vw sharan travel shaft managerial pto shaft set up sense bush hog slip clutch elements of 2005 subaru outback drive shaft “Serving ford 4000 pto shaft diagram agriculture, rhino bush hog gearbox scoring a achievement by way of high quality of merchandise and honesty in enterprise”, our products have been trustworthy by clients and have gained a greater share of industry. EPG model rotocultivator ploughshares in T. line have been picked as the Nationwide Rotary Tillage Equipment Market “Perfect Manufacturer Items” in 2007 by Rotocultivator Branch of China Agricultural Machinery Business Association. Substantial-performance motor-driven corn thresher Maize peeling and threshing device
Our corn /maize thresher is broadly applied for livestock breeding, farms, and home use. It is utilized shelling Maize from cobs. The equipment separates the kernels from the cobs with an remarkable velocity without any breakage of the kernels as nicely as cobs.
There are two sorts of electrical power for them: diesel motor or electrical motor. You can choose each and every variety in your want.
This maize threshing equipment is quite basic and having large output. It is also really effortlessly transportable because of very own wheel and related body. 

Product 5TY-850 5TY-850T
Performance (kg/h) 4000-5000 4000-5000
Threshing fee (%) ≥97 ≥97
Breakage rate (%) ≤2 ≤2
Rotation velocity (r/min) a thousand one thousand
Fat (kg) 360 a hundred and sixty
Electricity 15hp diesel   or 7.5KW motor Tractor   PTO power, 540r/min

Q: Are you investing business or producer ?
A: We are manufacturing facility.
Q: How extended is your shipping time?
A: Usually it is 1-3 days if the products are in stock. or it is 7-15 days if the products are not in stock, it is in accordance to quantity.
Q: Do you give samples ? is it totally free or extra ?
A: Of course, we could offer the sample for cost-free cost but do not shell out the cost of freight.
Q: What is your phrases of payment ?
A: Payment=3000USD, thirty% T/T in progress
 ,harmony just before shippment.
If you have yet another concern, pls really feel totally free to make contact with us as below:

Speak to: Allen Gao
Telephone/ : 86-18053402558
World wide web:
 Yucheng Liansheng Machinery Co.,Ltd.
 Yucheng City,Shandong Province, China

The use of unique products manufacturer’s (OEM) component figures or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our company and the detailed substitute components contained herein are not sponsored, authorized, or created by the OEM.

High-Efficiency  China  weasler 55 series pto shaft Motor-Powered Corn Thresher Maize Peeling and Threshing Machine with ce certificate top quality low price