Tag Archives: vertical shaft

China Basalt Crushers Vertical Shaft HP200 HP300 HP500 Single Cylinder Hydraulic Drive for Cone Crusher a line drive shaft

Solution Description

Functioning theory

When the cone crusher is working, the motor drives the eccentric bearing bushing by way of spring coupling, transmission shaft and a pair of cone equipment wheel. The crushing cone axis is pressured to swing by the eccentric bearing bushing, which makes the mantle at times close to the bowl liner, and occasionally far absent from the bowl liner. The raw materials are pressed, impacted and finally crushed in the crushing chamber.

Item Description

Solitary cylinder Hydraulic cone crusher is widely used in Quarrying and Mining sector, metallurgical, rod design, building material, chemical business and silicate sector and so forth. It can be utilised as secondary, tertiary or quaternary crushing tools, and can crush supplies of previously mentioned medium hardness, this sort of as iron ores, copper ores, limestone, quartz, granite, etc.

 

 

Specification

One cylinder hydraulic cone crusher specification:

Model DP-a hundred DP-160 DP-250 DP-three hundred
Motor electricity(kw) 75-90 one hundred ten-a hundred and sixty 132-250 200-315
Stroke(mm) 16,twenty,25 18,25,32,40 18,25,32,forty eighteen,twenty five,32,40
Weight (T) nine.eight twelve.8 23.two 38.five
Max feeding measurement(mm) Medium Coarse Added coarse 200 250 250 330 280 380 380 500

Ability of middle crushing

 

DP-100S Capacity (t/h)

Discharging

Stroke (mm)

20 25 30 35 40 45
16 80-90 105-115 120-one hundred thirty 135-145 145-a hundred sixty five 155-one hundred seventy five
twenty   120-one hundred thirty 145-155 160-180 170-200 185-215
twenty five     185-195 200-220 210-230  
DP-160S (t/h)

Discharging

Stroke(mm)

20 25 30 35 40 45 50
18   110-a hundred and forty 140-a hundred and seventy 160-a hundred ninety 180-210 200-230 230-260
twenty five     170-220 190-240 210-260 230-280  
32       230-280 270-320 280-350  

DP-250S (t/h)

Discharging

Stroke(mm)

twenty twenty five thirty 35 40 forty five fifty
eighteen   a hundred and seventy-a hundred ninety a hundred and seventy-210 a hundred ninety-230 210-255 235-275 255-295
twenty five     220-270 255-315 290-345 320-350 330-350
32       360-four hundred 380-420 400-420  
40         450-five hundred 480-530  

DP-300S (t/h)

Discharging

Stroke(mm)

forty five fifty 55 60 sixty five 70 75 80
eighteen 300-350 325-375 375-425 400-450 425-475 450-five hundred 500-550 550-600
twenty five   five hundred-550 550-600 600-650 650-seven-hundred seven hundred-750 750-800  
32   650-seven-hundred seven-hundred-750 750-800 825-875 900-950 950-1000  

Capability of fine crushing

 

DP-100 Capacity (t/h)

Discharging

Stroke(mm)

seven 10 thirteen 16 19 22 25
16 35-forty five 45-fifty five 55-65 sixty five-seventy five seventy five-85 eighty-ninety 85-ninety five
twenty 45-50 fifty-sixty sixty-70 70-eighty five 90-100 a hundred-110  
twenty five   55-65 sixty five-seventy five 75-ninety one hundred-115    

DP-one hundred sixty Capability (t/h)

Discharging

Stroke(mm)

8 10 fifteen twenty 25 thirty 33
18 60-70 70-90 80-one hundred and five 100-a hundred twenty five one hundred thirty five-150 a hundred and sixty-175 one hundred seventy-185
twenty five   90-110 one hundred ten-130 130-155 one hundred sixty-one hundred eighty 185-210  
32     one hundred forty-160 a hundred and seventy-a hundred ninety 190-200    
forty       two hundred-220 two hundred-240    

DP-250 Capability (t/h)    

Discharging

Stroke(mm)

8 12 sixteen twenty 24 28 32 36 40
25 a hundred-a hundred and twenty a hundred and twenty-140 one hundred forty-one hundred sixty one hundred sixty-a hundred and eighty a hundred and eighty-two hundred two hundred-220 220-245 245-265 265-290
32 one hundred-one hundred thirty a hundred thirty-160 one hundred seventy-200 195-225 200-250 250-280 275-305 305-335  
forty   a hundred and sixty-a hundred ninety 215-245 245-275 280-310 315-345 335-365    

DP-three hundred (t/h)    

Discharging

Stroke(mm)

eight twelve 16 twenty 24 thirty 35 40 forty five
25 a hundred and fifty-a hundred and seventy a hundred sixty five-185 190-210 230-250 250-270 280-300 320-340 340-370 370-390
32   two hundred-220 230-250 270-290 300-330 370-390 420-430 470-490  
forty   230-250 260-280 320-350 375-405 420-450 470-five hundred    

US $20,000
/ Piece
|
1 Piece

(Min. Order)

###

Type: Cone Crusher
Motor Type: AC Motor
Motor Power: 75kw
Application: Construction
Materials: Gangue
Outlet Size: 20-50mm

###

Customization:

###

Model DP-100 DP-160 DP-250 DP-300
Motor power(kw) 75-90 110-160 132-250 200-315
Stroke(mm) 16,20,25 18,25,32,40 18,25,32,40 18,25,32,40
Weight (T) 9.8 12.8 23.2 38.5
Max feeding size(mm) Medium Coarse Extra coarse 200 250 250 330 280 380 380 500

###

DP-100S CAPACITY (t/h)

Discharging

Stroke (mm)

20 25 30 35 40 45
16 80-90 105-115 120-130 135-145 145-165 155-175
20   120-130 145-155 160-180 170-200 185-215
25     185-195 200-220 210-230  
DP-160S (t/h)

Discharging

Stroke(mm)

20 25 30 35 40 45 50
18   110-140 140-170 160-190 180-210 200-230 230-260
25     170-220 190-240 210-260 230-280  
32       230-280 270-320 280-350  

###

DP-250S (t/h)

Discharging

Stroke(mm)

20 25 30 35 40 45 50
18   170-190 170-210 190-230 210-255 235-275 255-295
25     220-270 255-315 290-345 320-350 330-350
32       360-400 380-420 400-420  
40         450-500 480-530  

###

DP-300S (t/h)

Discharging

Stroke(mm)

45 50 55 60 65 70 75 80
18 300-350 325-375 375-425 400-450 425-475 450-500 500-550 550-600
25   500-550 550-600 600-650 650-700 700-750 750-800  
32   650-700 700-750 750-800 825-875 900-950 950-1000  

###

DP-100 CAPACITY (t/h)

Discharging

Stroke(mm)

7 10 13 16 19 22 25
16 35-45 45-55 55-65 65-75 75-85 80-90 85-95
20 45-50 50-60 60-70 70-85 90-100 100-110  
25   55-65 65-75 75-90 100-115    

###

DP-160 CAPACITY (t/h)

Discharging

Stroke(mm)

8 10 15 20 25 30 33
18 60-70 70-90 80-105 100-125 135-150 160-175 170-185
25   90-110 110-130 130-155 160-180 185-210  
32     140-160 170-190 190-200    
40       200-220 200-240    

###

DP-250 CAPACITY (t/h)    

Discharging

Stroke(mm)

8 12 16 20 24 28 32 36 40
25 100-120 120-140 140-160 160-180 180-200 200-220 220-245 245-265 265-290
32 100-130 130-160 170-200 195-225 200-250 250-280 275-305 305-335  
40   160-190 215-245 245-275 280-310 315-345 335-365    

###

DP-300 (t/h)    

Discharging

Stroke(mm)

8 12 16 20 24 30 35 40 45
25 150-170 165-185 190-210 230-250 250-270 280-300 320-340 340-370 370-390
32   200-220 230-250 270-290 300-330 370-390 420-430 470-490  
40   230-250 260-280 320-350 375-405 420-450 470-500    
US $20,000
/ Piece
|
1 Piece

(Min. Order)

###

Type: Cone Crusher
Motor Type: AC Motor
Motor Power: 75kw
Application: Construction
Materials: Gangue
Outlet Size: 20-50mm

###

Customization:

###

Model DP-100 DP-160 DP-250 DP-300
Motor power(kw) 75-90 110-160 132-250 200-315
Stroke(mm) 16,20,25 18,25,32,40 18,25,32,40 18,25,32,40
Weight (T) 9.8 12.8 23.2 38.5
Max feeding size(mm) Medium Coarse Extra coarse 200 250 250 330 280 380 380 500

###

DP-100S CAPACITY (t/h)

Discharging

Stroke (mm)

20 25 30 35 40 45
16 80-90 105-115 120-130 135-145 145-165 155-175
20   120-130 145-155 160-180 170-200 185-215
25     185-195 200-220 210-230  
DP-160S (t/h)

Discharging

Stroke(mm)

20 25 30 35 40 45 50
18   110-140 140-170 160-190 180-210 200-230 230-260
25     170-220 190-240 210-260 230-280  
32       230-280 270-320 280-350  

###

DP-250S (t/h)

Discharging

Stroke(mm)

20 25 30 35 40 45 50
18   170-190 170-210 190-230 210-255 235-275 255-295
25     220-270 255-315 290-345 320-350 330-350
32       360-400 380-420 400-420  
40         450-500 480-530  

###

DP-300S (t/h)

Discharging

Stroke(mm)

45 50 55 60 65 70 75 80
18 300-350 325-375 375-425 400-450 425-475 450-500 500-550 550-600
25   500-550 550-600 600-650 650-700 700-750 750-800  
32   650-700 700-750 750-800 825-875 900-950 950-1000  

###

DP-100 CAPACITY (t/h)

Discharging

Stroke(mm)

7 10 13 16 19 22 25
16 35-45 45-55 55-65 65-75 75-85 80-90 85-95
20 45-50 50-60 60-70 70-85 90-100 100-110  
25   55-65 65-75 75-90 100-115    

###

DP-160 CAPACITY (t/h)

Discharging

Stroke(mm)

8 10 15 20 25 30 33
18 60-70 70-90 80-105 100-125 135-150 160-175 170-185
25   90-110 110-130 130-155 160-180 185-210  
32     140-160 170-190 190-200    
40       200-220 200-240    

###

DP-250 CAPACITY (t/h)    

Discharging

Stroke(mm)

8 12 16 20 24 28 32 36 40
25 100-120 120-140 140-160 160-180 180-200 200-220 220-245 245-265 265-290
32 100-130 130-160 170-200 195-225 200-250 250-280 275-305 305-335  
40   160-190 215-245 245-275 280-310 315-345 335-365    

###

DP-300 (t/h)    

Discharging

Stroke(mm)

8 12 16 20 24 30 35 40 45
25 150-170 165-185 190-210 230-250 250-270 280-300 320-340 340-370 370-390
32   200-220 230-250 270-290 300-330 370-390 420-430 470-490  
40   230-250 260-280 320-350 375-405 420-450 470-500    

What is a driveshaft and how much does it cost to replace one?

Your vehicle is made up of many moving parts. Knowing each part is important because a damaged driveshaft can seriously damage other parts of the car. You may not know how important your driveshaft is, but it’s important to know if you want to fix your car. In this article, we’ll discuss what a driveshaft is, what its symptoms are, and how much it costs to replace a driveshaft.
air-compressor

Repair damaged driveshafts

A damaged driveshaft does not allow you to turn the wheels freely. It also exposes your vehicle to higher repair costs due to damaged driveshafts. If the drive shaft breaks while the car is in motion, it may cause a crash. Also, it can significantly affect the performance of the car. If you don’t fix the problem right away, you could risk more expensive repairs. If you suspect that the drive shaft is damaged, do the following.
First, make sure the drive shaft is protected from dust, moisture, and dust. A proper driveshaft cover will prevent grease from accumulating in the driveshaft, reducing the chance of further damage. The grease will also cushion the metal-to-metal contact in the constant velocity joints. For example, hitting a soft material is better than hitting a metal wall. A damaged prop shaft can not only cause difficult cornering, but it can also cause the vehicle to vibrate, which can further damage the rest of the drivetrain.
If the driveshaft is damaged, you can choose to fix it yourself or take it to a mechanic. Typically, driveshaft repairs cost around $200 to $300. Parts and labor may vary based on your vehicle type and type of repair. These parts can cost up to $600. However, if you don’t have a mechanical background, it’s better to leave it to a professional.
If you notice that one of the two drive shafts is worn, it’s time to repair it. Worn bushings and bearings can cause the drive shaft to vibrate unnecessarily, causing it to break and cause further damage. You can also check the center bearing if there is any play in the bearing. If these symptoms occur, it is best to take your car to a mechanic as soon as possible.
air-compressor

Learn about U-joints

While most vehicles have at least one type of U-joint, there are other types available. CV joints (also known as hot rod joints) are used in a variety of applications. The minor axis is shorter than the major axis on which the U-joint is located. In both cases, the U-joints are lubricated at the factory. During servicing, the drive shaft slip joint should be lubricated.
There are two main styles of U-joints, including forged and press fit. They are usually held in place by C-clamps. Some of these U-joints have knurls or grooves. When selecting the correct fitting, be sure to measure the entire fitting. To make sure you get the correct size, you can use the size chart or check the manual for your specific model.
In addition to lubrication, the condition of the U-joint should be checked regularly. Lubricate them regularly to avoid premature failure. If you hear a clicking sound when shifting gears, the u-joint space may be misaligned. In this case, the bearing may need to be serviced. If there is insufficient grease in the bearings, the universal joint may need to be replaced.
U-joint is an important part of the automobile transmission shaft. Without them, your car would have no wheeled suspension. Without them, your vehicle will have a rickety front end and a wobbly rear end. Because cars can’t drive on ultra-flat surfaces, they need flexible driveshafts. The U-joint compensates for this by allowing it to move up and down with the suspension.
A proper inspection will determine if your u-joints are loose or worn. It should be easy to pull them out. Make sure not to pull them all the way out. Also, the bearing caps should not move. Any signs of roughness or wear would indicate a need for a new UJ. Also, it is important to note that worn UJs cannot be repaired.

Symptoms of Driveshaft Failure

One of the most common problems associated with a faulty driveshaft is difficulty turning the wheels. This severely limits your overall control over the vehicle. Fortunately, there are several symptoms that could indicate that your driveshaft is failing. You should take immediate steps to determine the cause of the problem. One of the most common causes of driveshaft failure is a weak or faulty reverse gear. Other common causes of driveshaft damage include driving too hard, getting stuck in reverse gear and differential lock.
Another sign of a failed driveshaft is unusual noise while driving. These noises are usually the result of wear on the bushings and bearings that support the drive shaft. They can also cause your car to screech or scratch when switching from drive to idle. Depending on the speed, the noise may be accompanied by vibration. When this happens, it’s time to send your vehicle in for a driveshaft replacement.
One of the most common symptoms of driveshaft failure is noticeable jitter when accelerating. This could be a sign of a loose U-joint or worn center bearing. You should thoroughly inspect your car to determine the cause of these sounds and corresponding symptoms. A certified mechanic can help you determine the cause of the noise. A damaged propshaft can severely limit the drivability of the vehicle.
Regular inspection of the drive shaft can prevent serious damage. Depending on the damage, you can replace the driveshaft for anywhere from $500 to $1,000. Depending on the severity of the damage and the level of repair, the cost will depend on the number of parts that need to be replaced. Do not drive with a bad driveshaft as it can cause a serious crash. There are several ways to avoid this problem entirely.
The first symptom to look for is a worn U-joint. If the U-joint comes loose or moves too much when trying to turn the steering wheel, the driveshaft is faulty. If you see visible rust on the bearing cap seals, you can take your car to a mechanic for a thorough inspection. A worn u-joint can also indicate a problem with the transmission.
air-compressor

The cost of replacing the drive shaft

Depending on your state and service center, a driveshaft repair can cost as little as $300 or as high as $2,000, depending on the specifics of your car. Labor costs are usually around $70. Prices for the parts themselves range from $400 to $600. Labor costs also vary by model and vehicle make. Ultimately, the decision to repair or replace the driveshaft will depend on whether you need a quick car repair or a full car repair.
Some cars have two separate driveshafts. One goes to the front and the other goes to the back. If your car has four wheel drive, you will have two. If you’re replacing the axles of an all-wheel-drive car, you’ll need a special part for each axle. Choosing the wrong one can result in more expensive repairs. Before you start shopping, you should know exactly how much it will cost.
Depending on the type of vehicle you own, a driveshaft replacement will cost between PS250 and PS500. Luxury cars can cost as much as PS400. However, for safety and the overall performance of the car, replacing the driveshaft may be a necessary repair. The cost of replacing a driveshaft depends on how long your car has been on the road and how much wear and tear it has experienced. There are some symptoms that indicate a faulty drive shaft and you should take immediate action.
Repairs can be expensive, so it’s best to hire a mechanic with experience in the field. You’ll be spending hundreds of dollars a month, but you’ll have peace of mind knowing the job will be done right. Remember that you may want to ask a friend or family member to help you. Depending on the make and model of your car, replacing the driveshaft is more expensive than replacing the parts and doing it yourself.
If you suspect that your drive shaft is damaged, be sure to fix it as soon as possible. It is not advisable to drive a car with abnormal vibration and sound for a long time. Fortunately, there are some quick ways to fix the problem and avoid costly repairs later. If you’ve noticed the symptoms above, it’s worth getting the job done. There are many signs that your driveshaft may need service, including lack of power or difficulty moving the vehicle.

China Basalt Crushers Vertical Shaft HP200 HP300 HP500 Single Cylinder Hydraulic Drive for Cone Crusher     a line drive shaft		China Basalt Crushers Vertical Shaft HP200 HP300 HP500 Single Cylinder Hydraulic Drive for Cone Crusher     a line drive shaft
editor by czh 2023-01-23