We The oil is made to flow along the channel and is transported under pressure onto the parts that, due to the special manner in which the machinery is used, were not lubricated before.More importantly, we make special parts according to supplied drawings/samples and warmly welcome OEM inquiries. – EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
Our products is popular exported to the United States, Germany, Australia, Russia, Spain, Hungary, Zimbabwe, Ukraine, Nigeria, Peru, Brazil, Middle and South America, Thailand, Pakistan, Indonesia, more than 60 countries and regions.EPG Machinery Co., Ltd is a high-tech enterprise and focused on technological innovation, product research and development, product solution, equipments leasing and service etc. EPG developed kinds of Wind Power Parts, Agriculture Machinery Parts, Investment Casting Parts, Hydraulic Transmission Parts, Cylinder Parts, Valve Blocks, Dump Pump and Telecom Boxes etc. Agricultural Tractor Pto Gearbox and Gear Pump Assembly
Quick Details
| Place of Origin: ZHangZhoug, China (Mainland) | Brand Name: KRS | Model Number: 6003 |
| Gearing Arrangement: Spur | Output Torque: 119Nm | Rated Power: 10KW |
| Input Speed(eg.): 540r/min | Output Speed: 2050(ratio 3.8) | Material: Aluminium,steel |
| serie: 6001-5 gearbox | Use: for wood splitter or backhoe | Certification: CE |
| type: Group 3 serie 6001-5 gearbox | function: speed increaser | Rratio: 1:1.5, 1:2, 1:2.5, 1:3, 1:3.5, 1:3.8 |
| spare parts: with splined coupling | Warranty: available |
Product Description
step up gearbox for tractor pto
Series available:6001,6002,6003,6004,7001,7002,7003,7004,7105,7106,7107,…….
The Gearboxes are designed for connecting gear pumps to farm tractor power take offs (PTO). Output speed of power take offs is 540rpm which can be compared with the proper running speeds of hydraulic pumps. Different input running speeds can also be suitable,provided that the gearbox output speed does not exceed 3000 rpm.
Housing
Made in shell-cast aluminum or in high mechanical resistance cast iron.
Gears
Made in Steel UNI 18 PCR M03.Stub teeth guarantee very high resistance and run very quietly.
Shafts
Made in steel UNI 16 CRN4.They are coupled with gears via splined parts and are thus more suitable to stand the torques stated in the catalogue.
Torques
The torque figures mentioned in the technical charts of all the PTO Gearboxes refer to continuous duty cycles. Torques under intermittent worept conditions can be exceeded by 20%.
Lubrication
SAE 90 gear oil must be put in the pto gearbox prior to use-please note we do not supply the gear oil and will not accept responsibility for customers not putting oil in. Change the oil after the first 60-80 hours and then every 12 months or 1500 hours which ever falls first.
Maintenance
Please check the oil level via the special oil window every 50 hours. Worept temperatures should not exceed 120 degrees celcius under continuos duty cycle.
Pump assembly
Pump assembly requires a half-coupling and a fitting flange according to specific requirements,when ordering please specify flange and pump shaft type.Contact our technical staff when installing special pumps.
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indica john deere mx7 gearbox for sale Be’er Sheva Israel ting product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
